Amid constant iteration in high-efficiency solar cell technology, domestic businesses have exceeded 23% in the efficiency of mass production at new PERC production lines in 2021, and managed to develop ceilings at an efficiency of almost 24%, which further solidifies the determination of domestic businesses in establishing additional production lines for the N-type solar cell. N-type cells that ha...
The 166mm monocrystalline HJT solar cell developed by SunEvo has achieved a record-breaking conversion efficiency of 25.23% from the recent testing of the authoritative testing institution ISFH, which means SunEvo’s sturdy improvement in HJT solar cell technology, and indicates the company’s unswerving determination and strength in achieving the particular efficiency. It is understood that SunEvo ...
For more than ten years, the classic solar module with a cell size of 156 mm (M0 wafer), later 156.75 mm (M2 wafer), was considered as the standard solar PV module and was very popular. The times when solar module dimensions have remained on the market over a longer period of time and could be established as a standard are now over. This became particularly noticeable at the beginning of 2020 when...
How do half-cut solar cells work? Half-cut solar cell technology increases the energy output of solar panels by reducing the size of the cells, so more can fit on the panel. The panel is then split in half so the top operates independently of the bottom, which means more energy is created – even if one half is shaded. That’s the general overview – below, we break the process down. Traditional mono...
In the race to develop the most efficient type of solar panels, manufacturers have developed bifacial solar panels. This type of panel has solar cells on both sides which allows the technology to capture more sunlight leading to greater solar cell efficiency compared to traditional solar arrays. How Do Bifacial Solar Panels Work? Lets first dig deep into how bifacial solar panels function. The top...
What is BIPV? Traditionally, solar is mounted on a building’s roof, referred to as building-applied PV. But more architects are learning how to also incorporate solar cells and modules into things like curtain walls, roof tiles and railings known as building integrated photovoltaics (BIPV). A BIPV system consists of solar cells or modules that are integrated in building elements or material as par...
The ongoing demand for high-performance solar panels at a reasonable cost makes solar companies experiment with the structure of solar cells and tweak the module design. To improve the efficiency of the overall module, solar manufacturers optimize not just the solar cell but its entire cell design. One of such modifications or new innovations is incorporating multiple busbars on a panel....
Introduction Floating solar farms gained traction in 2018, particularly in countries with high population density and with competing uses for limited available land. These also operate at high efficiency since installing the solar panels on water helps cool the equipment. The Republic of Korea was among the first to pilot floating photovoltaic (PV) systems. State-owned Korea Water Resources C...